開発環境の作成
11/2
configure: error: can not find sources in . or ..
の内容が分からん。。オプション付加で解決するとかだけチラッと書いてるページはあったけど。。
とりあえず土曜日までお預け!
了解です
自分がやった内容はこれだけ
↓からgccをダウンロード
http://ftp.yz.yamagata-u.ac.jp/pub/GNU/gcc/gcc-3.4.6/gcc-3.4.6.tar.gz
上記ファイルを C:\cygwin\home\xxxにコピー(インストールフォルダによって変わる)
cygwinの立ち上げ
tar xvzf gcc-3.4.6.tar.gz
cd gcc-3.4.6
ls
↑gccっていうフォルダがある事を確認
./configure --target=h8300-elf --disable-nls --disable-threads --disable-shared --enable-languages=c
make
make install
(11/11/02)
10/31
■binutilsのビルド~make installはOK(多分)
原因は‥
①GCCのパスが通ってなかった。
②makeのインストールができてなかった。だったみたい。
上記を対応すると、うまくいった。
gccもこのままいけると思いきや
■GCCのビルドが‥orz
yukon@yukon-PC ~/gcc-3.4.6
$ ./configure --target=h8300-elf --disable-nls --disable-threads--disable-share
d --enable-languages=c
configure: error: can not find sources in . or ..
また明日!
そういえば秋月から連絡あって、今日速達で送ったそうな。
ソースが無いって言われてますね~
何ですかね。。
ソースの. か .. が無いってことですかね?
--disable-threads--disable-share
↑のオプションの間ってスペース入ってますか
今週中に解決しなかったら行きます
(2011/11/01)
10/30
■今出てるエラー
yukon@yukon-PC ~/binutils-2.19.1/binutils
$ ./configure --target=h8300-elf --disable-nls --disable-werror make
configure: WARNING: you should use --build, --host, --target
checking build system type... Invalid configuration `make': machine `make' not r
ecognized
configure: error: /bin/sh ./../config.sub make failed
今出てるエラーについて
①binutils-2.19.1.tar.gzは下記からダウンロード
http://ftp.yz.yamagata-u.ac.jp/pub/GNU/binutils/binutils-2.19.1.tar.gz
②/home/yukon/の下に①でダウンロードしたファイルをコピー
③cd /home/yukon/
④tar xvzf binutils-2.19.1.tar.gz
⑤cd binutils-2.19.1
⑥./configure --target=h8300-elf --disable-nls<ENTER>
一行じゃないとだめってのは嘘です~
あと自分の場合は--disable-werrorが無くても出来たのではじめは無しで試してもらえますか?
⑦make<ENTER>
⑧make install<ENTER>
coufigure error no acceptable C compiler found in $PATH
これはコンパイラが無いって言われてるんですかね?
gcc
って打った場合にcommand not foundとか出てないっすかね?
もし出てたら下記のことをやってみてください
①cygwin setup.exeを起動
②インストールと同じで インストールするパッケージ選択画面まで進む
③Develのgccを選択
④インストールする
最終更新:2012年04月25日 20:32